Opti-Rite® 1 dry erase wall covering is a non-magnetic, bright white, high gloss, whiteboard wall covering material. Opti-Rite ® 1 is available in rolls widths of 48" and up to 100' in length.
This material applies to a smooth wall or over an existing whiteboard or worn chalkboard to give you a clean fresh dry erase writing surface. Excellent for those situations where you need an odd sized dry erase board or want to create a full sized wall of dry erase surfacing.
Opti-Rite® 1 is hung on the wall in a similar fashion to wallpaper. It really separates itself from standard markerboards in that it is easily cut to size with a razor knife which enables installation on curved walls, around wall outlets or around other obstacles on your walls. Maybe best of all, with overlapping installation like wallpaper, you can cover your walls with a dryerase surface from floor to ceiling all the way around the room.
Pre-cut Lengths* of Opti-Rite® 1
|Order Code||Roll Size||Price / Roll|
|OMI-87-500-06||4' x 6'||$141.00|
|OMI-87-500-12||4' x 12'||$282.00|
|OMI-87-500-25||4' x 25'||$587.50|
|OMI-87-500-50||4' x 50'||$1,112.50|
|OMI-87-500-100||4' x 100'||$2,115.00|
1 U.S. Gallon
4 U.S. Gallons
Click here for Installation Instructions - After installation you need to wash the surface thoroughly before use. Use a good quality non-abrasive household cleaner like glass cleaner and rinse well with clean water. Dry with a soft towel and be sure material is completely dry before using.
*Custom cut lengths available... Call our customer service for assistance. All Opti-Rite® custom length orders are cut to your specifications and are NOT returnable. Do not crease materials as this may cause permanent damage to the writing surface.
Opti-Rite® I wall covering material is 12 micron ETFE film on a PVC sheet with a polyester cloth backing for maximum durability and performance.
Our adhesive is a semi-permanent adhesive. You may damage your dry walls removing the product at a later date. If you are concerned about being able to remove the Opti-Rite® at a later date we suggest using a Heavy Duty Clay or Clear Strippable Adhesive available at any local paint and wall paper outlet. 1 Gallon should cover 200 - 250 square feet of material.
Opti-Rite® is a registered trade mark of OptiMA Inc.